DRIVER'S SEAT REPAIR (Sheet 4 of 5)
Position tube assembly (J) in bracket (K).
Position lever (L) in bracket (K).
Position lever (L) and bracket (M) to seat
support (K) with holes alined.
Slowly and carefully install pin (N) through
bracket (K) and seat support. (M).
Using pliers, install new cotter pin (P) in pin
Place pin (Q) through bracket (K).
Intall new cotter pin (R) through pin (Q).
Using cutting pliers, cut safety wire holding
spring assembly (J) compressed and remove
Go on to Sheet 5