TM 9-2350-222-20-1-5
DRIVER'S SEAT ADJUSTING ASSEMBLY REPAIR (Sheet 2 of 10)
DISASSEMBLY:
Using pliers, remove cotter pin (A from pin (B).
1.
Throw cotter pin away.
Using pliers, remove pin (B) from ever (C).
2.
Remove lever (C).
3.
4.
Using 1/2 inch wrench on nut (D) and 9/16
inch wrench on nut (E), remove nuts (D) and
turning nut (D) counterclockwise and nut (E)
5.
Using pliers, remove two cotter pins (H) from
straight pins (J) in bellcrank (K). Throw cotter
pins away.
6.
Using pliers, remove two straight pins (J) from
bellcrank (K).
7.
Remove pin (L) from bellcrank (K). Remove
bellcrank (K) and shouldered stud (M).
Go on to Sheet 3
TA139225