TM 9-2350-222-20-1-5
DRIVER'S SEAT SUPPORT AND ADJUSTING ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
Position support assembly (A) to hull with top and bottom mounting holes alined.
1.
Using two 3/4 inch wrenches, install two screws (B), flat washers (C), new lockwashers (D), and
2.
nuts (E) through top of support assembly and hull mounting bracket.
Using 9/16 inch wrench, install two screws (F)
3.
support assembly (A) and hull mounting
bracket.
4.
End of Task