DRIVER'S HATCH DOOR ASSEMBLY AND SEALS (PASSIVE NIGHT VISION) REPAIR
(Sheet 2 of 5)
Slide door assembly (A) from hatch cover (G)
and spring (J) and remove onewasher (H).
Remove seal (K) from grooves in door
assembly (A). Use flat-tip screwdriver, if
necessary. Throw seal away.
Using 3/4 inch punch and hammer. drive out
bushings (L) and (M) from hatch cover (G).
Throw bushings away.
CLEANING AND INSPECTION
Clean all parts and bushing hole in hatch of
any foreign matter with dry cleaning
2. Clean seal grooves of door assembly (A)
with dry cleaning solvent. Use screw-
driver to remove old adhesive, if necessary.
Visually inspect all parts for cracks, dam-
age, and corrosion. Replace any defective
4. Corroded metallic parts which cannot be
shall be replaced.