DRIVER'S HATCH MOUNT LID LATCH REPAIR (M24 IR PERISCOPE) (Sheet 1 of 2)
6 in. extension with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
Lockwasher (MS35338-46) (2 required)
REFERENCE: TM 9-2350-222-10
Close driver's hatch (TM 9-2350-222-10)
Using socket, loosen two screws (A) and
(C) at latch (D).
Supporting latch (D) with one hand, re-
(B). Throw lockwashers away.
Lower latch (D) from mount (C) together
with latch spring (E) and spacer shim (F).
With latch (D) removed from mount (C),
separate latch from shim (F) and remove
Go on to Sheet 2