TM 9-2350-222-20-1-5
DRIVER'S HATCH MOUNT LID REPLACEMENT (M24 IR PERISCOPE) (Sheet 3 of 3)
4.
Position two hinges (C) into lid (D).
5.
Position spacers (E) on mount in same order as at disassembly.
6.
Position lid (D) with attached hinges (C)
and spacers (E) on top side of mount (B).
7.
screws (G).
8.
Using screwdriver, install two screws (G).
9.
Press seal (H) in groove of mount (B).
10.
End of Task
TA253598
16-112