TM 9-2350-222-20-1-5
DRIVER'S HATCH MOUNT AND GASKET (M24 IR PERISCOPE) REPAIR (Sheet 3 of 5)
CLEANING AND INSPECTION:
Visually inspect all parts for damage or wear. All damaged or worn parts must be replaced.
1.
Visually inspect all parts for corrosion. Corroded metallic parts which cannot be cleaned with crocus
2.
1.
catches (A) into mount (B).
Install plungers (C) and springs (D) into
Using allen wrench, install screws (E) into
3.
friction catches (A).
Using hammer, drive alining pin (F) into
4.
place on underside of hatch cover (G).
TA253593