DRIVER'S HATCH MOUNT AND GASKET (M24 IR PERISCOPE) REPAIR (Sheet 2 of 5)
Push up mount (F) and separate from
hatch cover (D). Place mount on top of
Remove gasket (G) from top of hatch cover
(D). Throw gasket away.
Using hammer and punch, remove one
mounting plate alining pin (H) from base
of hatch cover (D).
Remove mount (F) from vehicle.
Using allen wrench, remove two screws (J).
10. Using screwdriver, remove two friction
catches (K), springs (L), and plungers (M) from
mount (F) side.
11. Remove springs (L) and plungers (M) from
Go on to Sheet 3