DRIVER'S HATCH MOUNT AND GASKET (M24 IR PERISCOPE) REPAIR (Sheet 1 of 5)
Cleaning and Inspection
7/32 in. socket head screw key (allen wrench)
Pencil and paper
lockwasher (MS35336-39) (3 required)
Close driver's hatch (TM 9-2350-222-10)
Firmly support mounting plate (A) in position with one hand.
With other hand, use screwdriver to remove three screws (B) and three lockwashers (C) from lower
with both hands firmly supporting mounting plate (A), lower mounting plate from hatch cover (D).
Remove shims (E) from upper side of plate (A). Note number of shims positioned at each location for