DRIVER'S HATCH ROLLERS AND WIPERS REPAIR (Sheet 1 of 3)
TOOLS: 1/2 in. socket with 1/2 in. drive
Flat-tip offset screwdriver
Lockwasher (MS35338-43) (6 required)
Lockwasher (MS35338-45) (6 required)
Using flat-tip screwdriver, loosen and remove three screws (A) and three lockwashers (B) from
each end of hatch cover arm (C). Throw lockwashers away.
Remove one retainer (D) and one wiper (E) from each end of hatch cover arm (C).
Go on to Sheet 2