TM 9-2350-222-20-1-5
OUTRIGGER SUPPORT NO. 3 (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 4)
CLEANING AND INSPECTION:
1.
Inspect extension bracket for damage and
cracks. Replace if defective.
2.
Inspect threaded holes and studs for
thread damage. Replace or repair if
defective.
INSTALLATION:
1.
Using 1-1/8 inch socket, install No. 3
outrigger (A) to hull support with four
Using torque wrench and 1-1/8 inch sock-
et, tighten screw 125-130 lb-ft (169-176
Nm).
2.
Using 3/4 inch socket and 3/4 inch wrench,
install screw (C) and nut (D).
3.
Using 3/4 inch socket, install extension brac-
ket (E) to outrigger (A) with two screws (F).
TA253566
Go on to Sheet 4