OUTRIGGER SUPPORT NO. 3 (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
Using 9/16 inch socket, remove two bolts
(E) holding extension bracket (C) to out-
Remove extension bracket (C) from out-
Using 3/4 inch socket and 3/4 inch wrench,
remove one screw (F) and nut (G) holding top
flange of outrigger (D) to hull support.
Using 1-1/8 inch socket and hinged han-
(H.1, if used) holding outrigger (D) to hull
Remove outrigger (D).
Go on to Sheet 3