TURRET INFLATABLE SEAL MANIFOLD, GAGE, AND RELATED PARTS REPLACEMENT (Sheet
7 of 10)
Remove assembled gage (J), manifold (A), check
valve (D), and attached components from vise.
Position assembled gage (J), manifold (A), check
valve (D), and attached components as a unit to
Using 7/16 inch wrench, install two screws and
13. Install clamp (M) onto hose (N).
14. Install hose (N) onto connector (F) and slide
clamp (M) over hose and connector.
15. Using screwdriver, tighten clamp (M).
Go on to Sheet 8