TURRET INFLATABLE SEAL MANIFOLD, GAGE, AND RELATED PARTS REPLACEMENT (Sheet
5 of 10)
Perform the following steps
with unit in vise.
17. Using 9/16 inch wrench, remove gage (T).
18. Using 7/16 inch wrench, remove drain cock
19. Using 7/16 inch wrench, remove elbow (G).
Using 1-1/16 inch wrench to hold bottom of
check valve (U), use 9/16 inch wrench and
remove connector (W) and preformed packing
(X). Throw preformed packing (X) away.
Using 9/16 inch wrench to hold adapter (Y), use 1-1/16 inch wrench on top of check valve (T) and
remove check valve and preformed packing (Z). Throw preformed packing (Z) away.
Using 9/16 inch wrench, remove adapter (Y) from manifold (R).
Remove manifold (R) from vise.
Go on to Sheet 6