LOWER ENGINE ACCESS COVER REPLACEMENT (Sheet 1 of 2)
9/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Lockwasher (MS35335-35) (3 required)
Using socket, remove three screws, lockwashers, and washers (A). Throw lockwashers away.
Using socket, loosen four screws (B). Do not remove four screws (B).
If lower engine access cover
(C) sticks to bulkhead, it may
be loosened by reaching
through upper engine access
and applying pressure to
cover from behind.
Manually lift lower engine access cover up and away from bulkhead.
Go on to Sheet 2