TRANSMISSION DRAIN ACCESS COVER REPLACEMENT (Sheet 1 of 1)
9/16 in. socket with 1/2 in. drive
Lockwasher (MS35338-65) (6 required)
Two persons crawl under rear of vehicle
and locate transmission access cover (A).
With one person holding access cover (A),
second person, using socket, remove six
lockwashers (C) away.
Remove access cover (A) and gasket (D).
Throw gasket away.
Using putty knife, rags, and dry cleaning
old gasket material from cover and mating
surface on hull.
Apply adhesive (Item 4, Appendix D) to new gasket (D) and position onto access cover (A).
With one person holding access cover (A) and gasket (D) in position, second person, using socket,
install six screws (B) and new lockwashers (C) securing access cover (A) to vehicle.
End of Task