TM 9-2350-222-20-1-5
BULKHEAD ACCESS COVER REPLACEMENT (Sheet 1 of 2)
Flat-tip screwdriver
TOOLS:
5 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Putty knife
SUPPLIES:
Gasket (8762244)
Lockwashers (MS35338-65) (12 required)
REFERENCE: TM 9-2350-222-10
REMOVAL:
NOTE
T h e r e are two bulkhead
access covers directly oppo-
site each other.
1.
Traverse turret to gain access to access
cover (A) (TM 9-2350-222-10).
2.
Using socket, remove 12 screws (B) and
3.
Using falt-tip screwdriver, remove cover
(A) and gasket (D). Throw gasket away.
4.
Using putty knife, rags, and dry cleaning solvent (Item 54, Appendix D) remove any old gasket
material from cover and mating surface on hull.
Go on to Sheet 2
TA253556