EXHAUST DOORS REPLACEMENT (Sheet 2 of 4)
Position crane with hoist to rear of vehicle.
Wrap sling around door. Put two end eyes
of sling over hoist hook.
Using hoist, tighten sling around door.
Using hammer and drift punch, drive two
pins (C) out of hinges.
Remove two pins (C) and washers (D).
Using pinch bar, pry door away from hull
Using hoist and sling, move door to clean
Using 9/16 inch socket, remove 22 screws
tors (G and H) to right side door (F) only.
Remove two deflectors (G) and (H) from
right side door only.
Go on to Sheet 3