STEERING CONTROL INTERMEDIATE LINK ASSEMBLY REPLACEMENT (Sheet 1 of 2)
Slip joint pliers
9/16 in. open end wrench (2 required)
9/16 in. socket with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N-m)
Cotter pin (MS24665-283)
Using wrench, remove two bolts (A) and
remove rod ends from link assembly (B).
Using pliers, remove cotter pin (C). Throw cotter pin away
Using wrench, remove nut (D), washer (E), and washer (F).
Remove link assembly (B) and washer (G).
Go on to Sheet 2
15-22 Change 1