TRACK ASSEMBLY REPLACEMENT (Sheet 9.2 of 10)
For ease of access, end connector to
be tightened must be positioned at
number 6 roadwheel.
Start engine (TM 9-2350-222-10). Slowly move
vehicle until end connector (G) nut to be
tightened is positioned at number 6
Tightening inboard end connector
requires personnel to be under the
vehicle. Perform steps 50 through 53 to
prevent injury to personnel. (Refer to
Set transmission shift lever to park.
Set and lock brakes.
Block tracks to prevent vehicle
Shut engine off (TM 9-2350-222-10).
Go on to sheet 9.3
Change 5 14-90.1