COMPENSATING IDLER HUB AND ARM REPLACEMENT (Sheet 3 of 3)
Grease (Item 36, Appendix D) new packing (A).
Install it to groove in idler arm mount.
Using three persons, lift hub and arm
assembly (B) to mounting position.
Push arm of assembly (B) into mount
Aline holes in grease seal retainer (C) with
mounting holes on hub (D).
Using socket with torque wrench, tighten
screws (E) to 140-165 lb-ft (190-224 N m).
Using grease gun to fitting, shoot grease (Item
36, Appendix D) into idler arm mount housing
Test drive tank a short way (TM 9-2350-222-10).
End of Task
14-66 Change 1