COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 2 of 4)
COMPENSATING IDLER WHEEL
There are six roadwheel positions
- No. 1 thru No. 6 - on each side
There are two roadwheels at each
of these 12 positions for 24
r o a d w h e e l s at ground level. In
addition, there is a compensating
idler wheel at front top on each
side of tank. Each compensating
idler consists of two roadwheels.
Thus, there are four roadwheels in
addition to 24 at ground level -28
roadwheels in all.
Using 1-1/2 inch socket wrench, loosen 10 nuts (1). Do not remove.
O n compensating idler wheel only, disconnect
track (TM 9-2350-222-10) and proceed to step 9.
GO on to Sheet 3
Change 1 14-51