ROADWHEEL ARM REPLACEMENT (Sheet 3 of 7)
Using 3/4 inch wrench, remove six screws (A) and lockwashers (B) securing arm retainer (C) to
Using automotive wrench, screw adapter (E)
all the way into roadwheel arm opening.
Install slide hammer (F) to adapter (E).
There should be no side-to-side
movement of slide hammer. If
there is, remove and reinstall
adapter and slide hammer.
Have second person use crowbar and support
Using both hands, operate slide hammer on
puller from adapter end with force (away
Go on to Sheet 4