FINAL DRIVE VENTING SYSTEM REPLACEMENT (Sheet 2 of 10)
Using 9/16 inch wrench, disconnect tubing (A) from elbow (B) in right final drive.
Using 9/16 inch wrench, disconnect tubing (A) from tee (C) on left final drive.
Using 7/16 inch wrench, remove four screws (D) and lockwashers (E) securing clamps (F and G).
Remove tubing (A) and clamps (F) from vehicle.
Remove clamps (F) from tubing (A).
Using adjustable wrench, remove elbow (B) from right final drive.
Go on to Sheet 3
Change 1 12-21