UNIVERSAL JOINT REPAIR (Sheet 2 of 2)
Turn universal joint over. Repeat steps 5 thru 8 to remove second spider assembly from coupling
10. Replace coupling plate and each spider in its entirety if any component within an assembly is
cracked or broken.
Using wrench, replace lubrication fittings (A),
Place coupling plate (B) and either spider
assembly (C) on side.
Place spider assembly (C) into position on
coupling plate (B).
Using hammer, gently tap spider assembly (C)
and coupling plate (B) into snug fit.
Using hinge handle, install four screws (D).
Using socket and torque wrench, tighten
screws (D) to 115-130 lb-ft (155-175 N-m).
Turn universal joint over. Repeat steps 1
Place universal joint on end.
Using slip joint pliers, attach new lockwire
(E) (Item 59, Appendix D) to each two adja-
cent screws (F).
10. Using lubricating oil (Item 43, Appendix
D), oil universal joint assembly.
End of Task
Change 1 12-19