TRANSMISSION OIL BREATHER TUBE REPLACEMENT (Sheet 3 of 3)
Manually start elbow (A) into transmission.
Using 3/4 inch wrench, install elbow (A).
Make sure hole in elbow (A) is pointing
toward nut (B).
Manually install elbow (C) into nut (D).
Using 7/8 inch wrench on nut (D) and 3/4
inch wrench on elbow (C), tighten nut (D).
Position tube (E) between elbow (A) and nut
(B). If necessary, use 3/4 inch wrench to
aline elbow (A) with nut (F).
Manually start nut (F) onto elbow (A) and
tighten with 7/8 inch wrench.
Manually start nut (B) onto elbow (C).
Using 7/8 inch wrench, install coupling nut
(B) onto elbow (C).
Start engine. Check for exhaust leaks at
transmission oil breather tube (E)
Install transmission shroud (page 9-23).
End of Task