CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, LEFT FUEL TANK
(Sheet 4 of 6)
CLEANING AND INSPECTION:
Using putty knife, clean all areas where gaskets were mounted.
Using dry cleaning solvent (Item 54, Appendix D) and rag, wipe gasket surfaces clean.
Inspect cable and adapter and cover for damages. Replace damaged parts.
Position new gasket (A), cover (B). and new gasket (C) onto adapter (D). Aline screw holes. Using
screwdriver, install four screws (E) and new lockwashers (F) securing cover and gaskets to adapter
Position electrical lead (G) through gasket (H)
and, with hand, connect electrical lead (G) to
fuel pump (J).
GO on to Sheet 5