ENGINE WIRING HARNESS (DUST DETECTOR) REPLACEMENT (Sheet 2 of 8)
Disconnect connectors (A) from right and left bank pressure switches (B).
Using 7/16 inch socket, remove screws
leads (E) to brackets (F). Throw lock-
3. using 7/16 inch wrench and 7/16 inch
socket, remove screw (G) and nut (H)
securing clamp (J), retaining strap (K),
and pads (L) to tube assemblies (M).
Throw nut away.
Remove clamps (J) from wiring (N).
Go on to sheet 3