BATTERY GROUND CABLE REPLACEMENT (Sheet 2 of 3)
Using 9/16 inch wrench, remove nut (G) from terminal (H).
Using 1/2 inch wrench, remove nut (J) from terminal (H).
Remove two screws (K) and washers (L) from terminal (H).
Using lifter-scraper, remove terminal (H) from battery (M).
Remove battery ground cables (B).
Using 9/16 inchwrench,m install screw (A) , new lockwasher (B), lead (C), and lockwasher (D) to hull
Go on to Sheet 3