Manually traverse turret, as necessary, to gain
access to plate (B) (TM 9-2350-222-10)
Using socket, remove two screws and
Following steps performed in
Using socket, 3 inch extension, and ratchet,
Using screwdriver, loosen screw (D), on hose
Slide clamp (E) back on hose (G).
Disconnect hose (F) from tee (G) by pulling
Remove plate (B) from vehicle.
Position plate (A) in vehicle.
Manually install two screws and new
Using socket, 10 inch extension, and ratchet,
tighten screws (B).
Go on to Sheet 3