STARTER RELAY ASSEMBLY REPLACEMENT (Sheet 3 of 3)
Position relay (A) onto mounting plate.
Using 7/16 inch socket, install and tighten four
screws (B) securing relay (A) to mounting plate.
Install bus bar (C) onto relay (A) stud and
install nut (D).
Install bus bar (E) onto relay (A) stud and
install nut (F).
Using torque wrench and 3/4 inch socket,
tighten nuts (D) and (F) 14 to 16 lb-ft. (18-20
Position cover (G) over relay (A).
Using 7/16 inch socket, install and tighten three screws (H) and washers (J) securing cover (G) to
Connect three battery ground cable assemblies onto battery terminals (page 10-285).
Start engine (TM 9-2350-222-10).
Stop engine (TM 9-2350-222-10).
End of Task