TM 9-2350-222-20-1-4
MASTER CONTROL PANEL PLATE ASSEMBLY REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1
Using wrench to hold nut, use 7/16 inch
wrench to remove screw (A) holding ground
lead, Throw lockwasher away.
2.
Using wrench to hold nut, use 7/16 inch
wrench to remove screw (B) holding ground
lead. Throw lockwasher away
3.
Using 9/16 inch socket, remove seven screws
4.
Using socket, remove eight screws (G) and
washers (H).
5.
mounting bracket.
6.
Remove plate (F) from vehicle.
GO on to Sheet 3
TA139709
10-153