INDICATOR LIGHT BASE ASSEMBLY REPAIR (Sheet 1 of 1)
TOOLS: 1 in. combination box and open end wrench
REFERENCE: TM 9-2350-222-10
SUPPLIES: Lockwasher (7358624)
If nut is difficult to remove, use
pliers to hold base assembly.
Using wrench, remove bond nut (A) and
lockwasher (B) from lampholder (C). Throw
Remove retaining strap (D) and preformed
packing (E) from lampholder (C).
CLEANING AND INSPECTION:
Clean all component parts as required.
Inspect base assembly for broken or damaged
parts. Replace as required.
Place lampholder (C) in position in retaining
Using wrench, install bond nut (A) and new
Place preformed packing (E) in position on
Install base assembly in master control panel
(See Master Control Panel Repair Index - page
End of Task