MASTER CONTROL PANEL REPAIR (Sheet 11 of 65)
IR Power Switch and Indicator Light Replacement (Sheet 2 of 4)
Using fingers, remove connector from rear of base assembly (D).
If necessary, use adjustable wrench to remove adapter. It may
be necessary to remove screws before adapter can be turned.
Remove lens (E) and adapter (F) from base
assembly (D) by turning counterclockwise.
Using fingers, remove preformed packing (G)
from adapter (F). Throw preformed packing (G)
Using fingers, remove lamp (H) by pushing in
and turning counterclockwise.
Using screwdriver, remove two screws (J) and
Remove base assembly (D).
Go on to Sheet 3