STARTER REPLACEMENT (Sheet 2 of 7)
Using 13/16 inch wrench, remove nut and
lockwasher (A) securing ground straps (B),
heavy cables (C) and (D) and light cable (E) to
terminal on front of starter (F). Throw
Remove all cables and tag.
Using 3/4 inch socket, remove nut, external
tooth lockwasher, and split lockwasher (G)
securing two heavy cables (H) and (J) and
one light cable (K) to terminal on front of
Remove and tag all cables.
Using screwdriver, remove screw and
external tooth lockwasher (M) securing cable
(N) to terminal at lower front of starter
switch relay solenoid (L). Remove cable.