TM 9-2350-222-20-1-3
ENGINE COOLING FAN REPLACEMENT (Sheet 2 of 4)
CAUTION
Do not drop screws and Iockwashers into fan assembly.
NOTE
Both engine cooling fans are replaced the same.
REMOVAL:
Using 9/16 inch socket, remove four screws and lockwashers (A) holding fan cover (B) to engine.
1.
Remove fan cover (B).
2.
Using slip joint pliers, remove cotter pin (C) and throw away.
3.
Using 1-1/4 inch socket, remove hex nut and
4.
flat washer (D) holding fan to shaft (E).
Remove assembled fan and hub (D) from shaft
5.
(E).
TA140282
Go on to Sheet 3
9-48