TRANSMISSION SHROUD BRACKET REPAIR (Sheet 2 of 6)
Using socket, remove five screws (G), lockwashers (H), and flat washers (J) securing retainers (K)
Remove retainers (K) and side insulation (L)
from shroud bracket (D).
Using cross-tip screwdriver, remove three screws (M) and lockwashers (N) securing retainer (P) to
shroud bracket (D). Throw lockwashers (N) away.
Using flat-tip screwdriver, remove retainer (P),
seal (Q), and retainer (R) from shroud bracket
Go on to Sheet 3