TM 9-2350-222-20-1-3
TRANSMISSION SHROUD REPAIR (Sheet 2 of 6)
DISASSEMBLY:
Using 7/16 inch socket, remove six screws (A), lockwashers (B), and flat washers (C) holding
retainer (D) to transmission shroud (E). Throw lockwashers (B) away.
Remove retainer (D) from shroud (E).
2.
3.
Remove seal assembly (F) from shroud (E).
4.
Using 7/16 inch socket and 7/16 inch wrench, remove five screws (G), ten flat washers (H), and
five self-locking nuts (J) holding seal (K) to transmission shroud (E) both right and left sides:
Throw self-locking nuts (J) away.
Remove seal assembly (K) from shroud (E).
TA140261
Go on to Sheet 3
9-27