TM 9-2350-222-20-1-3
ENGINE SHROUD REPAIR OFF ENGINE (Sheet 1 of 2)
TOOLS: Putty knife
7/16 in. socket with 1/2 in. drive
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Adhesive (Item 4, Appendix D)
Insulation (10863512)
Insulation (8762924)
Lockwasher (MS35338-46) (12 required)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using socket, remove six screws (A),
1.
retainer (D) to engine shroud (E) both sides.
Throw lockwashers (B) away.
Using socket, remove six screws (F),
2.
retainer (J) to engine shroud (E) both sides.
Throw lockwashers (G) away.
3.
Remove retainers (D) and (J).
4.
Using putty knife, remove insulation (K) and
(L) from both sides of engine shroud (E). Throw
insulation away.
5.
Using dry cleaning solvent (Item 54, Appendix
D) and rags (Item 65, Appendix D), clean areas
where insulation (K) and (L) were removed.
TA140248
Go on to Sheet 2
9-11