ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 4 of 5)
Position access plates (A) on each side of engine
Using 9/16 inch socket, install six screws,
access plate (A) to shroud (C).
Install seal (E) and retainer (F) to shroud (C),
Using screwdriver, tighten six screws (G).
Install seal (H) and retainer (J) to shroud (C),
using two screws and new Iockwashers (K)
Using screwdriver, tighten two screws (K).
Install elbow (L), seals (M), and elbow retainers
(N) to shroud, using six screws, washers, and
new lockwashers (P).
Using 7/16 inch socket, tighten six screws (P).
Go on to Sheet 5