TM 9-2350-222-20-1-3
RIGHT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS:
10 in. adjustable wrench
No. 1 cross-tip screwdriver
9/16 in. open end wrench
7/8 in. combination box and open end wrench
5/16 in. combination box and open end wrench
S c r e w d r i v e r , flat-tip, 1/4 in.
SUPPLIES:
Lockwasher (MS35335-58) (11 required)
Gasket (10864007)
Self-locking nut (SPL51712-6) (6 required)
Silicone compound (Item 32, Appendix D)
PRELIMINARY
PROCEDURE:
REMOVAL:
Using adjustable wrench to hold elbow (A)
and using 7/8 inch wrench, disconnect nut
(B) from elbow (A).
Using flat-tip screwdriver, loosen
clamp (C).
E N G I N E RIGHT BANK \ !
Go on to Sheet 2
TA249110
Change 2
8-25