INTAKE TUBE AND HOSES REPLACEMENT (Sheet 1 of 1)
1 / 4 in. flat-tip screwdriver
Silicone compound (Item 32, Appendix D)
R E F E R E N C E : TM 9-2350-222-10
Open top deck grille doors (TM 9-2350-222-10)
Replacement of left or right intake tubes and hoses is the same.
Using screwdriver, loosen clamps (A)
and remove tube (B) or hose (C) or (D)
Remove clamps (A).
Lightly coat inside ends of hose(C or D)
with silicone compound (Item 32,
Install two clamps (A) onto hose (C or D).
Install hose (C) onto manifold (E) and tube (B). Using screwdriver, tighten clamps (A).
Install hose (D) onto tube (B) and cap assembly (F). Using screwdriver, tighten clamps (A).
End of Task