EXHAUST PIPE (RIGHT SIDE) REPLACEMENT (Sheet 2 of 4)
Using adjustable wrench to hold elbow (A), use
7/8 inch wrench and loosen fitting (B).
Using hammer, tap elbow (A) and lift tube (C)
from exhaust pipe.
Using socket and 9/16 inch wrench, remove six
self-locking nuts (D) holding exhaust pipe (E) to
turbosupercharger housing (F). Remove
exhaust pipe (E) with insulation halves (G) and
gasket (H) from turbosupercharger housing (F).
Throw gasket (H) and self-locking nuts (D)
Using cross-tip screwdriver and 5/16 inch
wrench, remove 14 screws (J), each with two
one nut (M) holding insulation halves (G) to
Using flat-tip screwdriver, remove clamp (N)
from packing (P). Remove packing (P) from
Remove insulation halves (G) from exhaust