ACCELERATOR BULKHEAD FLANGE ASSEMBLY NUT REPAIR (Sheet 1 of 2)
5/8 in. drive punch
3/8 in. combination box and open end wrench
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Seal (871 1329) (2 required)
Rags (Item 65, Appendix D)
Using hammer and punch, remove two seals
Throw seals away.
Using hammer and punch, drive bushing (C) out
of nut (B). Throw bushing away.
Go on to Sheet 2
Change 1 7-455