TM9-2350-222-20-1-3
ACCELERATOR TUBE ASSEMBLY REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS:
1/2 in. combination box and open end wrench
Slip joint pliers
7/16 in. combination box and open end wrench
Mechanic's scribe
Torque wrench with 1/2in. drive (0-1751b-ft) (0-237N.m
1/2 in. crowfoot wrench with 1/2 in. drive
Hinged handle with 1/2 in. drive
SUPPLIES: Cotter pin (MS24665-281 )(2 required)
Rags (Item 65, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Pencil and paper
Lockwasher (MS35338-44)
NOTE
Remove fixed fire extinguisher
cylinder, if necessary to perform
task (page 21-49).
1.
Using pliers, remove cotter pin (A) from pin (B), Throw cotter pin away.
2.
Remove pin (B) from clevis (C).
Go on to Sheet 2
TA148118
7-442