ACCELERATOR LEVER ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: Diagonal cutting pliers
9/16 in. socket with 1/2 in. drive
3/4 in, combination box and open end wrench
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 Nm)
SUPPLIES: Cotter pin (MS24665-287)
Cotter pin (MS24665-281) (2 required)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-46) (2 required)
Using pliers, remove cotter pin (A) from pin (B).
Throw cotter pin away.
Remove pin (B) from clevis (C).
Using pliers, remove cotter pin (D) from pin (E). Throw cotter pin away.
Remove pin (E) from clevis (F).
Using pliers, remove cotter pin (G) from nut (H). Throw cotter pin away.
Using wrench, remove nut (H), flat washer (J), washer bearing (K), and lever (L) from support (M).
Go on to Sheet 2