ACCELERATOR FOOT PEDAL LOCK ASSEMBLY REPLACEMENT (Sheet 2 of 3)
Unhook spring (D) from bracket (C) and from control lever (E).
Using pliers, remove cotter pin (F). Throw cotter pin away.
Remove washer (G) and control lever (E) from bracket (C).
CLEANING AND INSPECTION:
Clean all parts using dry cleaning solvent (Item 54, Appendix D) and rags (Item 65, Appendix D),
Inspect all parts for cracks, bends, wear, or
other defects. Replace defective parts.
Install control lever (A) and washer (B) on
Using pliers, install new cotter pin (D).
Hook spring (E) on control lever (A) and on
Go on to Sheet 3