MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT
(Sheet 9 of 10)
Input Solenoid Valve Replacement (Sheet 4 of 5)
Coat male threads of elbow, tee, and adapter with sealing
compound (Item 28, Appendix D) before installation.
Install and aline elbow (A) as shown to solenoid valve (B). Using 9/16 inch wrench, tighten elbow.
Install and aline tee (C) as, shown to elbow (A). Using 7/16 inch wrench, tighten tee.
Install nipple (D) to solenoid valve (B). Using 7/16 inch wrench, tighten nipple.
Use 7/16 inch wrench, hold nipple (D) and install fuel filter (E) on nipple. Aline filter as shown.
Position bracket (F) in place on engine.
Install two screws (G) to secure bracket. Using 7/16 inch wrench, tighten screws.
Go on to Sheet 5