MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT
Sheet 7 of 10)
Input Solenoid Valve Replacement (Sheet 2 of 5)
Use suitable container to catch fuel that may leak whenever
any part of fuel system is loosened or disconnected. Use rags
(Item 65, Appendix D) to wipe any spillage.
Disconnect electrical lead (A) from solenoid valve (B).
Using 7/16 inch and 1/2 inch wrenches, disconnect two fuel lines (C) from tee (D).
Using 1/2 inch and 5/8 inch wrenches, remove fuel line (E) from adapter (F).
Using 5/16 inch wrench, remove two screws and washers (G).
Using screwdriver, remove two screws (H) with lockwashers and flat washers. Throw lockwashers
Remove solenoid valve (B), fuel filter (J), and attached fittings as a unit.
Go on to Sheet 3