MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
Using 3/4 inch wrench, disconnect ignition lead
(A) from spark plug (B).
Use suitable container and rags
(Item 65, Appendix D) as required
to catch or wipe up fuel spillage
whenever any fuel line or fitting is
loosened or removed.
Using 7/16 inch wrench, disconnect fuel input tube (C) from elbow (D).
Using 9/16 inch wrench, disconnect fuel return tube (E) from elbow (F).
Using 1/2 inch wrench, remove four nuts and washers (G). Throw nuts away.
Remove manifold heater (H) and gasket (J). Throw gasket away.
Go on to Sheet 3